Model 114 ASME Code Soft Seat Safety Valves are constructed of
brass with a Viton seal and positive stop for a bubble-tight seal.
This valve is also equipped with a protective stem cover and manual
test lever. Internal construction and performance are the same as
Model 115 differing only by the test lever. The Model 114 ASME Code
Soft Seat Safety Valve, like every Safety Valve, is set and tested
at factory for quality and dependability.
The Model 114 ASME Code Soft Seat Safety Valve is approved in
Massachusetts and Washington DC and is stamped with UV & NB
symbols. Registered in all Canadian provinces and
territories.
Set pressure range 25 to 250 psi (5 psi increments
only)
Maximum temperature -20 to 400°F
Detail Features:
- ASME Sec. VIII, Air/Gas, 'UV' Stamp.
- Brass Construction, ASTM B16.
- Bubble-tight seating below the re-seat pressure.
- Every safety valve is set and tested at the factory.
- Heavy duty construction for lasting performance.
- Kingston quality design, engineering and precision
manufacturing.
- Lever for manual testing.
- National Board Certified, 'NB' Stamp.
- Pop-style safety valve.
- Precision machined for smooth operation.
- Precision Machined with Soft Seat.
- Registered in all Canadian provinces and territories: CRN
#0G3144.1C.
- Set Pressure Range 25-250
- Stainless steel spring.
- Tested in National Board Approved Quality Assurance
Process.
- Viton Seals for durability and performance.
| Model
Name |
Inlet
Size |
Inlet
Orifice |
Min Temp |
Max Temp |
Pressure
Range |
Height |
Width |
Thickness |
Hex |
Approx. Shipping
Weight |
| 114-6-000 |
1" |
0.625 |
- |
400 |
25-250 |
4-15/16" |
- |
- |
1-5/16" |
1 lb. 8 oz. |
PSI Specification
If ordering online, at Step 4: Review Your Order, enter in the
"Review Order Notes" box your PSI in increments of 5 according to
the PSI range listed above. If ordering through customer service,
be sure to let them know the PSI increment needed.