CALL NOW: 866.650.1937

Recently added item(s) ×

You have no items in your shopping cart.

Champion Advantage Series

Champion Advantage Series

$0.00
Reciprocating Air Compressor 5 - 25 HP (16 - 91 cfm)

Champion Advantage Series - GroupThe Advantage Series is a fully packaged unit with all of the additional accessories customers need included. Advantage series compressors are typically shipped from the factory in 24 hours or less. Compressors are shipped ready to install and operate. Each new assembled unit has a five-year, pro-rated warranty on the compressor pump.

Specifications and Features:

  •    •   5 - 25 hp
  •    •   Maximum Pressure Up to 175 psig
  •    •   16.5 - 90.1 acfm at 175 psig
  •    •   Two Stage, Splash Lubricated
  •    •   Tank Mounted, Simplex and Duplex Models
  •    •   Vertical or Horizontal Configurations
  •    •   Factory filled with ChampLub lubricant

 

Models

Select by model below to see Champion Advantage Series technical specifications, and pricing. Advantage models are broken down in 3 different Volt variations. (230/1, 230/3, 208/3) Contact our customer service team toll-free 866-650-1937 if you have any questions on the Champion Advantage Air Compressors or to place an order.

Model Specifications

Model # HP Variants
Standard
Volts CFM PSI Tank Capacity
Gallons*
RPM Weight
lbs
Dimensions
L x W x H in.
VR5-8 5 CASRSA01 230/1 16 175 80V 734 535 33 x 24 x 77
VR5-8 5 CASRSA03 230/3 16 175 80V 734 535 33 x 24 x 77
VR5-8 5 CASRSA05 208/3 16 175 80V 734 535 33 x 24 x 77
HR5-8 5 CASRSA07 230/1 16 175 80H 734 535 66 x 23 x 49
HR5-8 5 CASRSA09 230/3 16 175 80H 734 535 66 x 23 x 49
HR5-8 5 CASRSA11 208/3 16 175 80H 734 535 66 x 23 x 49
VR7F-8 7.5 CASRSA13 230/1 23 175 80V 990 545 33 x 24 x 77
VR7F-8 7.5 CASRSA15 230/3 23 175 80V 990 545 33 x 24 x 77
VR7F-8 7.5 CASRSA17 208/3 23 175 80V 990 545 33 x 24 x 77
VR10-12 10 CASRSA19 230/3 34 175 120V 740 890 47 x 30 x 81
VR10-12 10 CASRSA21 208/3 34 175 120V 740 890 47 x 30 x 81
HR10-12 10 CASRSA23 230/3 34 175 120H 740 890 72 x 24 x 55
HR10-12 10 CASRSA25 208/3 34 175 120H 740 890 72 x 24 x 55
HR10-12 10 CASRSA27 230/3 34 175 120H 740 920 72 x 24 x 55
HR10-12 10 CASRSA29 208/3 34 175 120H 740 920 72 x 24 x 55
HRA15-12 15 CASRSA31 230/3 53 175 120H 770 1110 74 x 28 x 62
HRA15-12 15 CASRSA33 208/3 53 175 120H 770 1110 74 x 28 x 62
HRA25-12 25 CASRSA35 230/3 90 175 120H 770 1365 74 x 27 x 64
HRA25-12 25 CASRSA37 208/3 90 175 120H 770 1365 74 x 27 x 64

* V: Vertical, H: Hortizontal Configuration

Accessories

Pre-Installed Accessories

Model # HP Variants
Standard
Mounted
Mag Starter
Vibration
Isolators
Automatic
Tank Drain
Low Oil
Level Switch
Air Cooled
Aftercooler
Dual
Control
VR5-8 5 CASRSA01 X X X X    
VR5-8 5 CASRSA03 X X X X    
VR5-8 5 CASRSA05 X X X X    
HR5-8 5 CASRSA07 X X X X    
HR5-8 5 CASRSA09 X X X X    
HR5-8 5 CASRSA11 X X X X    
VR7F-8 7.5 CASRSA13 X X X X X  
VR7F-8 7.5 CASRSA15 X X X X X  
VR7F-8 7.5 CASRSA17 X X X X X  
VR10-12 10 CASRSA19 X X X X X  
VR10-12 10 CASRSA21 X X X X X  
HR10-12 10 CASRSA23 X X X X X  
HR10-12 10 CASRSA25 X X X X X  
HR10-12 10 CASRSA27 X X X X X X
HR10-12 10 CASRSA29 X X X X X X
HRA15-12 15 CASRSA31 X X X X X X
HRA15-12 15 CASRSA33 X X X X X X
HRA25-12 25 CASRSA35 X X X X X X
HRA25-12 25 CASRSA37 X X X X X X
Features

cut away

  1. MULTI-FINNED CYLINDERS
    Lower operating temperatures deliver dependable performance and a longer service life.
  2. INTEGRAL CYLINDER/HEAD
    The gasketless cylinder head design avoids a common maintenance issue, blown head gaskets.
  3. BALANCED PISTONS
    Aluminum alloy first-stage piston is weight-matched to the cast iron second-stage piston, ensuring proper balance.
  4. PISTON RINGS
    Three compression rings and one wiper control ring maximize compression, while keeping lube in the case.
  5. LIGHTWEIGHT CONNECTING RODS
    High-density, die-cast aluminum alloy rods minimize reciprocating weight. A built-in crankpin bearing and piston-pin needle bearing distribute the bearing load. The needle bearings provide longer bearing life than bushings commonly used by other manufacturers.
  6. PRESSURE RELIEF VALVES
    Located in interstage and discharge.
  7. INTERCOOLERS
    Finned tubing provides the greatest cooling effect between stages for maximum compressor efficiency.
  8. OPTIMIZED COOLING FAN/FLYWHEEL
    The flywheel doubles as a fan cooling the compressor pump extending its service life.
  9. RELIABLE, HIGH-FLOW VALVES
    Single-unit, disc-type valves provide low lift and long life. Valves are easily serviced by removing the manifolds only.
  10. OVERSIZED MAIN BEARINGS
    Tapered roller-type main bearings deliver the longest possible life.
  11. BALANCED CRANKSHAFT
    The rugged ductile iron crank is designed for minimum bearing loads. Counterweights minimize vibration.
  12. LARGE CAPACITY CRANKCASE
    Rugged cast iron oil reservoir has convenient sight gauge glass, corner oil fill boss and large oil drain.

 

 

 

Advantage Series Componnents

Magnetic Starter provides thermal overload protection. Comes standard with all Advantage Series air compressors.   Air Compressor Magnetic Starter
Air cooled aftercooler removes up to 65% of the moisture from discharged compressed air.   Champion Integrated Aftercooler
Automatic tank drain removes water from air tank. No need to drain the air tank each night.   Pneumatic Tank Drain
Vibration isolators separate the air compressor from the floor. Reduces noise and protects the compressor from any out-of-level floor situation.   Vibration Pads
Low oil level monitor shuts down the air compressor when oil levels are low. Prevents the unit from restarting if oil levels are low.   Low oil level monitor
4-micron air filter system stops dirt particles from entering the air compressor.   Heavy Duty 4 Micron Inlet Air Filter
Champions superior cylinder head design eliminates the headgasket; therefore, the possibility of a blown headgasket.   No Gasket Cylinder Head
Champion exploits the domed piston using large diameter, low lift valves. The valves reduce clearance volume for the best compressed air delivery.   Domed Piston

 

 

Standards

Champion Advantage Series air compressor packages take the proven R Series reciprocating air compressor pump and put it with the most important and popular options. These off-the-shelf air compressor packages come ready to install at a fair price. Contact our customer service team toll-free 866-650-1937 with any questions or to order your Champion Advantage.

Delivery

FREE DELIVERY. Shipping is included in the unit price. Champion Advantage Series air compressors ship within 24 hours of your order. Its one of the fastest turnaround times in the industry.

Free delivery for continental 48 states only.

Service

Your local Champion Distributor is ready to assist you with product support, advice and maintenance. Purchase from eCompressedair and receive local support. Champion has distributors throughout the United States and the World. Over 1,100 distributors worldwide.

Installation and start-up assistance are available for a modest cost. Call us at 704-846-2004 for an estimate.

Warranty

Advantage series reciprocating compressor feature a five-year, pro-rated use warranty on all pumps. 5-year warranty on electric motors and receivers.

Economical

Fully-equipped reciprocating compressor packages at low fair prices.

Engineering Drawing