The Mag-11 is designed to remove
condensate from compressed air filters. The Mag-11 uses internal
magnetic forces as its power source to operate. It is therefore
ideally suited to apply on applications where power is not
available, not desired or not reliable. The operating is automatic
and there is zero air loss during the condensate discharge
cycle.
- No electricity required
- Zero air loss during the condensate
discharge
- Maximum pressure 232 psi
- Direct operated valve - not
diaphragm type
- Large (2.0 mm) valve orifice
- The direct acting valve is
serviceable
- Suitable for all types of compressed
air filters
A float in the MAG-11s reservoir
rises as condensate collects. Once 8 ounces are collected the valve
opens. When the condensate finishes draining, magnetic force closes
the valve. No timers to set or plug in. The MAG-11 operates
automatically and does not waste any valuable compressed air.
Specifications
- Maximum drainage capacity: 52.84
gallons per hour
- Valve Inlet: 1/2 inch NPT
Female
- Valve Outlet: 1/8 inch NPT
Female
- Maximum Pressure: 232 psi
- Minimum Pressure: 0 psi
- Maximum Temperature: 122°F
- Minimum Temperature: 36°F
- Weight: 3 lbs
- Housing Material: Corrosion
resistant Aluminum
- Direct operated valve (not a
diaphragm valve)
- Large 2.0 mm valve orifice --
prevents clogging
- Valve Seals: Viton® (FPM)
- Direct acting valve is stainless
steel
- Valve is serviceable. Easy to
disassemble clean and repair
- Suitable for use with all types of
compressed air filters
- Includes anti air lock connection
(see photo right)