Skip Navigation
Home>Drain Valves>Timer-Controlled>Motorized Ball Drain Valves>Air Saver

Air-Saver

Motorized Ball Valve, 0 - 230 psi

Air Saver Featured

The Air-Saver is installed on the air outlet of the air tank. The Air-Saver will automatically open just prior to the working shift begins, and closes just after the working shift is over.

A typical compressed air system will lose compressed air through pipe connections, non-demand drains etc. At the end of the final work shift, the Air-Saver will shut the air tank off from the rest of the system. The content of compressed air within the air tank will be saved rather than lost through pipe leakages.

Benefits:

  • • No unnecessarily start up of compressors during periods when
    compressed air is not required
  • • At least one air receiver's worth of compressed air savings per day
  • • Possibility to shut of parts of the pipe line system
    where compressed air is not needed continuously
  • • Manual Override: Yes
  • • Compact design -Easy to install

Technical Advantages:

  • • Slow valve opening to avoid water hammer in pipe line system
  • • Time programmed or remote controlled
  • • Integral lithium battery protects program for five (5) years
  • • Each individual day can be programmed according to specific working day shift requirements
Models

The Air Saver is available in 2 connection sizes with different voltage options. Select the part number below for the drain valve needed to order online or see more information. If you have questions contact our customer service by calling toll-free: 866-650-1937 or email sales@ecompressedair.com.

Part
Number		 Inlet Connection
Size (NPT)		 Voltage Valve Body Min/Max
Pressure		 Operating
Temperature		 Power Consumption
(during cycle)		 Opening/Closing
Duration
1213323 1" 230 VAC Stainless Steel 0 - 230 psi 35°F - 140°F 7W 90 degrees in 70 seconds
1213324 1" 115 VAC Stainless Steel 0 - 230 psi 35°F - 140°F 7W 90 degrees in 70 seconds
1213325 2" 230 VAC Stainless Steel 0 - 230 psi 35°F - 140°F 7W 90 degrees in 70 seconds
1213326 2" 115 VAC Stainless Steel 0 - 230 psi 35°F - 140°F 7W 90 degrees in 70 seconds

Installation

The Air-Saver is installed on the air outlet of the air tank. The Air-Saver will automatically open just prior to the working shift begins, and closes just after the working shift is over.
To Top of Page