Aircel Centrifugal Water Separators
1. Threaded separators are manufactured from aluminium and are
PED 97/23/EC compliant.
2. Threaded connections are BSP parallel to ISO7/1 or NPT to ANSI
B2.1 if supplied within North America.
3. Float operated automatic drain valves, model AD16, with manual
override facility are fitted to Models AG20WS to AG300WS. When high
quantities of liquid are anticipated, Aircel recommends the use of
a "no loss" type drain valve.
4. Mounting brackets are available for models AG20WS to
AG300WS.
5. All aluminium separator bodies are coated with blue polyester
powder paint finish to eliminate corrosion.
6. Flanged separators are fabricated from carbon steel and
manufactured in accordance with BS EN286, or ASMEVIII and U Stamped
for the USA, CRN approved for use within Canada.
7. Flanged connections are to BS 4504 PN16, DIN2633 or ANSI 150
#RF if supplied within North America.
8. 1/2" manual drain valves are fitted to AG391WS to AG800WS, 3/4"
fitted to AG1000WS and AG1200WS as standard. An additional 1/2"
side entry drain port is included on models
AG391WS to AG800WS, 3/4" to AG1000WS and AG1200WS.
9. Internal centrifugal separator manufactured from nylon for
AG20WS to AG300WS and stainless steel for AG391WS to A1200WS.
10. All flanged separator bodies are coated inside and out with
blue polyester powder paint finish to eliminate corrosion.
11. Separators are suitable for use with mineral and synthetic
oils plus oil free compressed air applications.
12. Centrifugal water separators are silicone free.