Skip Navigation
Home>Filtration>Centrifugal Separators>Donaldson Cyclone Centrifugal Separator

Donaldson Centrifugal Cyclone Separator

70 SCFM - 1400 SCFM, 1/2" NPT - 3" FLG Connections

Donaldson Cyclone Separators are designed for removal of liquid water and particulate from compressed air and gases. The DF-C Cyclone Separators deliver high separation efficiency at low pressure drop through an optimal flow-path design. The AG-Z (aluminum) Cyclone Water Separator has a three-piece aluminum housing.

How the Cyclone Water Separator Works

The compressed air is guided over the swirl vanes, which direct the compressed air into the housing. Liquid aerosols and particles flow down the filter housing and are drained out of the filter housing. The conical form of the lower filter bowl is designed to eliminate aerosol carry over. The turbulent free zone in the lower part of the filter housing prevents condensate from being picked up and "carried over" into the clean air.

Features

  • - DF-C is available in 5 different housing sizes with a flow range of 70 - 647 scfm.
  • - AG-Z is available in 2 different housing sizes with a flow range of 900 & 1400 scfm.
  • - Standard housing are equipped with timer-operated drain valves (DF-C models)
    and automatic zero-air loss drain valves (AG-Z models).
 Donaldson DF-C AG-Z Models
Model Specifications

DF-C Models

Click on model number to see specifications about the model as well as to order. Contact our customer service calling toll-free: (866) 650-1937 or email sales@ecompressedair.com for more infomation.

Model Capacity1
(scfm)

Inlet
(FNPT-C")

 Volume
(gal)		 Weight
(lbs)		 A" B" D" E" F" G" H"
(min/max)		 I" Timer
Drain Valve
DF-C 0120 70 1/2" 0.106 3.5 11.14 4.06 9.6 4.53 1.93 3.35 0.88/2 4.2 UFM-T05
DF-C 0210 123 3/4" 0.304 5.9 14.51 5.5 12.7 7.1 1.93 4.6 0.88/2.8 5.9 UFM-T05
DF-C 0320 188 1" 0.304 5.9 14.51 5.5 12.7 7.1 1.93 4.6 0.88/2.8 5.9 UFM-T1
DF-C 0450 264 1-1/2" 1.32 6.4 22.5 7.5 20 9.8 1.93 6.3 0.88/13.56 7.5 UFM-T1
DF-C 0750 441 2" 1.32 6.4 22.5 7.5 20 9.8 1.93 6.3 0.88/13.56 7.5 UFM-T20
DF-C 1100 647 2" 1.32 6.4 22.5 7.5 20 9.8 1.93 6.3 0.88/13.56 7.5 UFM-T20

1 Capacity based on 100 psig inlet pressure; 14.7 psia, 68°F ambient conditions, and 1" psid. Maxiimum Operating Pressure: 232 psi. Continuous Operating Temperature: 34°F to 149°F. Standard housings are equipped with timer-controlled zero air-loss condensate drain valves.

Specifications

Continuous Operating Temperature: 34°F to 149°F
Maximum Operating Pressure: 232 psig
Filter Housing: Aluminum die cast
Timer Drain: Brass
Sealings: Viton/NBR
Retention Rate: 99% for particles ≥ 5 μm / 100% for particles ≥ 10μm

AG-Z Models

Click on model number to see specifications about the model as well as to order. Contact our customer service calling toll-free: (866) 650-1937 or email sales@ecompressedair.com for more infomation.

Model Capacity1 (scfm)

Inlet (FNPT)

 Outlet (ANSI) Weight (lbs.) Height Width Conn. Height Zero Air-Loss Drain Size
AG-Z 0144SP 900 2-1/2" 2-1/2" 19.8 32" 8" 28" UFM-T100
AG-Z 0192SP 1400 3" 3" 19.6 32" 8" 28" UFM-T100

1 Capacity based on 100 psig inlet pressure; 14.7 psia, 68°F ambient conditions, and 1" psid. Superplus housings are equipped with Ultramat UFM-T zero air-loss condensate drain valves.

Specifications

Maximum Inlet Air Temperature: 150°F (65°C)
Minimum Inlet Air Temperature: 34°F (1°C)
Maximum Operating Pressure: 250 psig
Materials: Aluminum
Retention Rate: 99% for particles ≥10 μm
Surface Finish: Blue Polyester Resin

Correction Factor

Capacity correction factors for differing system air pressure (C1)

System Pressure (psig) 20 40 60 80 100 120 140 160 180 200 220 240 250
Correction Factor 0.30 0.48 0.65 0.83 1 1.17 1.35 1.52 1.70 1.87 2.05 2.22 2.31

Capacity correction factors for differing system air temperature (C2)

System Pressure (psig) .20 0 20 40 60 80 100 120 140 150
Correction Factor 1.52 1.41 1.31 1.22 1.14 1.07 1 0.94 0.88 0.86





To Top of Page