Donaldson DF-C 0750 Cyclone Separator W/Drain

How It Works

Donaldson Cyclone Separators are designed for efficient removal of liquid water and particulate from compressed air and gases. Donaldson DF-C Cyclone Separators deliver high separation efficiency at low pressure drop through an optimal flow-path design. An innovative insert in the cyclone head creates centrifugal action that forces liquid and particulate to the housing wall. Friction with the housing causes the liquid and particulate to lose part of their kinetic energy and drop out of the higher moving airstream. Collected condensate is removed by a time controlled UFZ condensate drain, while the purified compressed air or gas exits to the industrial application downstream. Available in six different sizes with a flow range from 70 to 647 scfm at 100 psig. Conforms to European directive 97/23/EG for pressure vessels.

Features

• Flow-optimized design
• Innovative spin insert
• Bayonet lock ensures housing cannot be opened under pressure
• Immersion-laquered housing on inside and outside surfaces
• Wall-bracket and UFM-T electronic level-controlled condensate drain options

Benefits

• Low pressure drop resulting in energy savings
• High efficiency over a broad flow range
• High safety during operation
• Long-term corrosion protection
• Flexibility to meet installation and application requirements

¹ Capacity based on 100 psig inlet pressure; 14.7 psia, 68°F ambient conditions, and 1" psid. Maxiimum Operating Pressure: 232 psi. Continuous Operating Temperature: 34°F to 149°F. Standard housings are equipped with timer-controlled zero air-loss condensate drain valves.

Specifications

Continuous Operating Temperature: 34°F to 149°F
Maximum Operating Pressure: 232 psig
Filter Housing: Aluminum die cast
Timer Drain: Brass
Sealings: Viton/NBR
Retention Rate: 99% for particles ≥ 5 μm / 100% for particles ≥ 10μm

Donaldson DF-C Cyclone Water Separator Brochure (PDF)