eCompressedair's Gardner Denver 2116110 oil filter replacement
is manufactured to meet or exceed the OEM specification.
- Type: Spin-On Filter
- Approximate Height: 5.00" in.
- Approximate Depth: 5.00" in.
- Approximate Length: 7.00" in.
- Approximate Weight: 2 lbs.
- OEM: Gardner Denver
- OEM Part #: 2116110
Oil Filters present the second
barrier of protection. These are usually rated at 10 to 20 microns.
Filter material is also paper or synthetic, and can be surface
loading or depth loading. (contaminants enter the filter media and
are trapped within the depth of the media, rather than only on the
Canister (Cartridge) Oil
Filter Element - This consists of an element inside a
metal canister. The canister must be opened, and the new filter
installed inside the cavity. This element may be a variety of
materials (metal mesh, synthetic, paper, or cloth) and will be
manufactured with micron ratings compatible to the OEM
Spin-On Oil Filter
Element - Simple removal by spinning off and replacing the
element. Manufactured of synthetic, paper, metal mesh or cloth,
with a micron rating which varies based on manufacturer
The proper selection and use of
compressed air filters will prevent many short and long term
problems with your compressed air equipment and systems and save
you substantially in down-time and component replacement costs over
the life of your compressed air system.
Our Oil Filter Replacements come with
a manufacturer's warranty that matches or exceeds the original OEM
warranty and specifications.
manufacturer (OEM) names are the trademarks of each manufacturer.
On products marked "replacement," OEM names and part numbers are
for reference only.