Aircel MIS-4500 Mist Eliminator

Aircel provides a full line of mist eliminators to effectively remove oil, solids and water from your compressed air system. In addition, this technology can serve as an efficient prefilter and contaminant separator for refrigerated and desiccant compressed air dryers.  By reducing the liquid loading potential and preventing liquid slugs from reaching the dryer, it will extend the life of your refrigerated dryer's heat exchanger or the life of desiccant in regenerative dryers.

Element Features
• High efficiency pleated construction.
• High efficiency needled polyester outer layer particulate removal.
• Two stage borosilicate glass coalescing media.
• Unique threaded element "design" (patent pending) requires no internal loose parts and no internal housing center core.
• The filter element will collect particles greater than 1 micron with 99.5% efficiency. Particles 0.5 micron in size will be filtered at an efficiency of 99.3%.

Brochure

Download more information for the MIS Mist Eliminator series.

Dimensions & Specifications

If you have questions call our customer service toll-free: 866-650-1937.

¹ Capacity rated at 100 psig operating pressure, 100°F inlet temperature. Maximum working pressure: 250 psig Cover style: Blind flange Operating temperature range: -20°F to 200°F Carbon steel leg height: 12" (included in OH dimension above)

If you have questions or would like to purchase an Aircel Mist Eliminator call our customer service toll-free: 866-650-1937.

Features

• Low pressure differential ΔP 0.5 - 1.0 psi @ rated capacity under typical conditions.
• Long service life.
• Pressure vessel ASME U Stamped standard National Board Registered.
• CRN available upon request.
• Low pressure drop, maximum filter area and dirt capacity.
• Hinged flange and lift lug standard on closure flanges.
• Service access without breaking connections.
• Rugged enameled steel.
• Connections sizes from 2 to 10-inch ANSI flange.
• 5-year performance warranty.

Optional Features

If you have questions call our customer service toll-free: 866-650-1937 for additional pricing and options information.

• Installed differential pressure gauge.
• Zero air-loss drain valve.

Energy Savings

For every 8 psi pressure drop, compressor horsepower efficiency will be reduced by 4%. Therefore, the annual energy cost to run a typical 100 hp compressor can be figured as follows:

• Convention Filter: $0.07/KW-hr x 8760 hours x 74.6 KW-hr x 4% = $1829.80
• Mist Eliminator: $0.07/KW-hr x 8760 hours x 74.6 KW-hr x 0.5% = $228.70 (1 psi pressure drop = 0.5%)
• That's a savings of $1601.10 per year