Deltech ME-1500 Mist Eliminator

Air auditors always consider ME series Mist Eliminators due to the .5 psig wetted pressure drop of the filter element.  The unique housing and filter element is becoming the solution of choice for compressed air users who have decided to reduce the air compressor horsepower required to maintain stable air pressure in their plant.

Dimensions & Specifications

If you have questions or would like to order call our customer service toll-free: 866-650-1937.

Maximum working pressure: 150 psi (10.5 kgf/cm²), Maximum operating temperature: 150ºF (66ºC)

• Flows from 125 through 3,000 scfm
• Energy Savings:0 .5 psig wetted-element pressure drop vs. 4-7 psig for comparable filtration performance from traditional designs
• 10 Year Element Life: reduce maintenance costs by not having to change elements once a year
• Performance: removes 99.95% of solid particulates and liquids to 0.1 micron. Removes oil droplets and mists to 0.5 ppm
• Flood protection: the generously-sized housing and filter element designs provide insurance against the downstream damage a flood water can cause should the condensate drains of the upstream aftercoolers next to the air compressors fail
• Differential pressure indicator is standard

The compressed air stream enters the interior cavity of the filter element via the top inlet connection.  Dense layering of filter media allows the irregular zigzagging Brownian motion to progressively capture finer liquids and particulates on each layer.  Smooth laminar flow characteristics maintain efficiency and low pressure drop across the entire range of flow.  Coalesced liquids drain by gravity into the sump.  Re-entrainment is prevented due to low velocities.  A dedicated drainage port is provided.