Puro 300 CFM Oil/Water Separator

The lubricant you use in your air compressor determines the type of filter bags you need. If you are using a Polyglycol based lubricant (IR Ultracoolant SSR or Sullube 32) choose Polyglycol...for all other lubes select Synthetic. The PURO condensate separator covers compressor capacities up to 8 m³/min (300 CFM). Polypropylene attracts oil and captures it, almost as if it draws oil like a magnet. That simplicity and our technology are at the root of the PURO's efficiency to clean virtually all types of condensate (emulsified or not). The typical output oil residue value is less than 10 ppm.

Features & Benefits

• No de-rating or over-sizing (no complicated sizing charts required)
• Will handle and separate mineral oil, synthetic oil and stable emulsions
• Is applied on capacity of compressed air systems up to 35m³/min (1250 CFM)
• Does not incorporate/require a condensate settling tank (no bacteria growth
• Test valve for sampling purposes
• Simple to install
• Easy to maintain
• Rugged PE housing
• Small compact design
• Clothing kit included

Specifications

• Maximum Compressor Capacity: 300 CFM (8m³/min)
• Max. oil adsorption white element: 2 3/4 gallons
• High performance white element: 1
• Activated carbon element: 1
• Inlet Connections: 1/2'' 2 each
• Outlet Connections: 1/2''
• Housing Material: PE
• Test Valve: Yes
• Target Oil Residue (outlet valve): < 10 ppm
• Weight Approximately 50 lbs (packaged weight)
• Dimensions HxWxD (inches): 26 x 14 x 28 Inch

Dimensions