BEKO QWIK-PURE® 50 Oil/Water Separator

Model Specifications

Contact our customer service toll-free: 866-650-1937 with any questions on our BEKO Oil/Water separators or to order.

How to Size QWIK-PURE Oil/Water Separators

THE OPERATING PRINCIPLE: YOUR GUARANTEE FOR COST-EFFECTIVE CONDENSATE TREATMENT

The oil contaminated condensate flows under pressure into the newly designed pressure relief chamber.

1 Here, the pressure is released without creating turbulence downstream 2 of the condensate inlet. The oil contaminated condensate flows into the high volume pre-filter 3, which is characterized by its ideal flow pattern from the inside to the outside. Here the remaining oil droplets are bound to the pre-filter. It also deals with any residual floating oil in the upper chamber.

4. As the pre-treated condensate enters the main cartridge the remaining oil is adsorbed and locked into our advanced filter material where it cannot escape.

5 The condensate is now fully treated and flows around the lower chamber wall toward the clean water outlet.

6 The final result is purified water suitable for discharge directly into the sewer system.

Thanks to the cartridge technology, filter replacement is both quick and clean; and all without the use of activated carbon.

The separation of oil and water for dispersed condensates usually represents a cost saving and permanently reliable solution to the problem. The purified water also meets the legal requirements regarding wastewater discharge. With many innovations and the respective know-how, BEKO's redesigned QWIK-PURE® generation demonstrates the head start of an experienced producer.

Quick and Clean Filter Replacement

SIMPLIFIED SERVICE / NO MESS
Lightweight, easy to change cartridge and the exterior remains clean and dry (no dirty hands)

UNIQUE ADSORPTION MATERIAL
New filling material that is extremely light, not messy and has increased performance

RELIABLE OPERATION
Works well with all lubrication types

ENVIRONMENTALLY SAFE
Cartridge can be disposed of normally and is safe for any sanitary land-fill

FUTURE PROOF
Easy expansion with specifically designed accessories

QWIK-PURE® units are future proof solutions
When adding additional horsepower or connecting multiple QWIK-PURE® units; the solution is simple with our easy to use, wall mountable flow splitter. The flow splitter is a configurable condensate manifold that can operate as 1 inlet into 2, 3, or 4 outlet configurations.

Fully adaptable and configurable multiple inlet adapter for every application
For every QWIK-PURE® model, a multiple inlet adapter is available allowing for a variety of installation options. This is a standard feature on the QWIK-PURE® 200 and 350.

Also suitable for piston compressors
QWIK-PURE® devices are suitable for the processing of condensate from piston compressors.

Operator-friendly cartridge technology
Enables quick and clean replacement. Minimized waste and easy disposal.

Superior filter material
Greater efficiency thanks to improved pre-filter and primary filter materials. Superior to conventional activated carbon filters.

Extended maintenance intervals
Enable optimum synchronization with compressor preventative maintenance contracts.

Operationally reliable
The newly designed pressure relief chamber with non-turbulent condensate conduction and the overflow-protected oil receiver constitute important factors in terms of operational reliability.

Optional heating system
The retrofit of a heating system is possible during operation without emptying the separator. Heating systems are optional accessories for QWIK-PURE® 200 and 350 only.

Download the recommended installation guide for BEKO QWIK-PURE® 50 model below.

QWIK-PURE® 50