CALL NOW: 866.650.1937

Recently added item(s) ×

You have no items in your shopping cart.

Replacement for Ingersoll Rand All Season Select (1 Qt.)

Replacement for Ingersoll Rand All Season Select (1 Qt.)

$17.00
Part #: All Season Select (1 Qt.)
$17.00
Availability : Contact Us
Premium Compressor Oil
OR



YOU MAY ALSO NEED

Description

Details

The diester-based fluids are full synthetic compressor lubricants specially formulated with premium synthetic ester base stocks for use in wide variety of air compressors. They are designed from diester base oils for rotary screw compressors and will offer a typical service life of 8,000 hours under good operating conditions. They are designed from diester base oils for reciprocating compressors and are recommended for high pressure air compressors.

Recommended for reciprocating compressors and vacuum pumps using the following gases:
  • Air
  • Butadiene
  • Carbon Dioxide (dry)
  • Furnance (crack) Gas
  • Ethylene
  • Natural Gas
  • Helium
  • Hydrogen
  • Methane
  • Synthesis Gas
  • Hydrogen Sulfide (dry)
  • Sulphur Hexafluoride
  • Propane
  • Carbon Monoxide
  • Nitrogen

Typical Industrial Applications: Rotary Screw Compressors, Rotary Vane Compressors, Reciprocating Compressors, Centrifugal Compressors, High Pressure Air Compressors, Gear Boxes, Chains, and Vacuum Pumps

Performance Benefits:

  • Outstanding thermal oxidative stability
  • Will not varnish or form carbon deposits
  • Wide operating temperature range
  • Built in detergency action
  • Extended drain intervals/reduced oil disposal, thus increasing cost effectiveness
  • Caution: May affect some paint finishes, plastics and seals
  • USDA H-2 authorized

  


eCompressedair is an independent supplier of aftermarket compressor replacement parts and is not affiliated with manufacturers mentioned in this web site. Original equipment manufacturer (OEM) names are the trademarks of each manufacturer. On products marked "equivalent" or "replacement," OEM names and part numbers are for reference only.

Specifications
Typical Properties       Test Method  
SAE Viscosity Grade       SAE J-300 30
ISO Viscosity Grade       D2422 100
Viscosity cSt. 40° C   D445 99
  cSt. 100° C   D445 10.2
Viscosity Index       D2270 83
Pour Point   °C   D97 -29
    °F     -30
Flash Point   °C   D92 260
    °F     500
Foaming Seq. I,II,III       D892 Nil
Copper Corrosion       D130 1B
Specific Gravity       D1298 0.95
USDA Authorization   H-1 or H-2     H-2
Demulsibility       D1401 Excellent
Four Ball Wear, 40 Kg.,
1200 rpm, 75C, 1 hr.,
Scar Diameter, mm
      D4172 0.38
Evaporation, %       D972 0.98
Carbon Residue, %       D189 <0.02