Conrader CTC In-Tank Check Valves without Port Hole (Compression Inlet)
Conrader CT-Series and CTL-Series check valves are used in compressed gas and pneumatic systems. These valves open to allow flow in one direction and close when the flow stops or reverses. The CT-Series and CTL-Series have a male outlet connection for use in tanks and receivers.
The CTC and CTD valves have a male (compression fitting) inlet and a male outlet. The difference between the CTC and the CTD is the CTD has an 1/8" port on the side. Inlets range from 3/8" to 3/4" male (compression fitting). Outlets range from 3/8" to 1" Male NPT.
eCompressedair is an independent supplier of aftermarket compressor replacement parts and is not affiliated with most manufacturers mentioned in this web site. Original equipment manufacturer (OEM) names are the trademarks of each manufacturer. On parts, filters, and lubricant products marked "equivalent" or "replacement," OEM names and part numbers are for reference only.