Transair 1001E63 00 08 2-1/2" ID (63 mm) Flexible Hose

Transair® flexible hoses are engineered for easy installation in tight spaces. Due to the tight bend radius, a flexible hose can be installed in tight, close quarter areas. The use of a flexible hose can eliminate most layout constraints and reduce the mechanical stress on a compressed air system. These hoses are commonly used to route the compressed air line around an obstacle, preventing pressure drop that comes from excessive use of elbows. All flexible hoses come in fixed lengths with attached ends to eliminate the need to cut and crimp the hose. The SBR cover is resistant to most mineral and synthetic compressor oils. All hoses meet ISO 8030 for fire resistance. Transair® flexible hoses are rated for use in compressed air systems only. Parker Hannifin warrants all Transair® components to be free of defects in material and workmanship for 10 years from the date of installation. To prevent serious bodily harm or property damage, an anti-whiplash strap needs to be installed along with the flexible hose. Parker Transair® suggests installing straps on either side of the connection to prevent the hose from whipping in the event of a blow-off.
Transair® Flexible Hose, 2-1/2 in ID, 3-1/8 in OD, 4 ft 7 in Length, Aluminum Tube, SBR Cover, 12 in Bend Radius, 232 psi, 115 deg F Temperature High, -4 deg F Temperature Low, Black Color

• Quick connection technology
• Modular and reusable
• Optimum flow rate
• Faster installation, lightweight
• Lower installation costs
• Immediate pressurization

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Transair_6699_01_01_Catalog.pdf