Transair RX30 L1 00 3" ID (76 mm) Flange Adapter

Transair® fittings for stainless steel pipe are quick and easy-to install. All fittings are designed to securely fit around Transair® stainless steel pipe, increasing system efficiency and preventing leaks. Transair® fittings for stainless steel pipe are available in a variety of styles for easy assembly and layout design for compressed air, vacuum, industrial, inert gas, process water or chemical transfer system. Fittings are available with either FKM or EPDM for robust chemical compatibility. The infull bore in design of Transair® fittings pair with the low coefficient of friction in the stainless steel pipe ensures optimal flow throughout the system. All components are 100% recyclable, silicone free and manufactured from materials with no propagation of flame. Parker® HANNIFIN warrants all Transair® components to be free of defects in material and workmanship for 10 year from the date of installation. Transair® 3/4 in and 1 in fittings use push-to connect technology. To install, mark the insertion depth on the pipe and insert the pipe into the fitting until the edge of the connector meets the marked line on the pipe. Transair® 1-1/2 in and 2 in fittings use clamp ring technology. To install, place the clamp ring over the lugs at the end of the pipe and slide the fitting nut in place. Next, hand tighten the nut onto the body. Lastly, use a pair of spanner wrenches to tighten the fitting one half (1/2) turn. All 1-1/2 in and 2 in stainless steel pipe comes from the factory pre-lugged, but if field cutting is required, the lugs need to be made using a Transair® lugging tool and die. Transair® 3 in and 4 in fittings use clamshell technology. To install, place the remove cartridge over the end of the pipe until it meets the lugs. Next, place the clamshell union over the cartridge and tighten the fitting using a cross bolt pattern. All 3 in and 4 in stainless steel pipe comes from the factory pre-lugged, but if field cutting is required, the lugs need to be made using a Transair® lugging tool and die.
Transair® Flange Adapter, Adapter Fitting, 3 in Connection Size 1, 3 in Connection Size 2, Stainless Steel, 304 Stainless Steel Material Construction, 145 psi, 7-5/16 in Dia x 2-15/16 in L, -4 to 194 deg F, 5-3/4 in Bolt Circle Diameter, 11/16 in Bolt Size

• Quick connection technology
• Modular and reusable
• Optimum flow rate
• 100% recyclable
• Faster installation
• Lower installation costs
• Immediate pressurization
• Corrosion-resistant

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Transair_6699_01_01_Catalog.pdf