Kingston 115-2-045 Safety Valve with Pull Ring

KINGSTON model 115 ASME code soft seat safety valves are constructed of brass with a FKM seal and positive stop for a bubble tight seal. This valve is equipped with a pull ring for manual testing. Internal construction and performance are the same as model 114 differing only by the pull ring. The KINGSTON model 115 ASME code soft seat safety valve, like every KINGSTON safety valve, is set and tested at factory for quality and dependability. Registered in all Canadian provinces and territories. Set pressure range 25 to 300 psi (5 psi increments only). Maximum temperature -20 to 400 deg F.
KINGSTON Safety Relief Valve, Model: 115, Vent to Atmosphere Style, 1/4 in Nominal, NPT Connection, 45 psi Pressure Rating, 33 cfm Flow Rate, Air, Gas Media, Pull Ring Actuator, 0.219 sq-in Orifice, Brass Body, Soft Seat, Brass Stem, Vinyl Seal, Trim Material: Brass Lock Nut/Music Wire/Stainless Steel Spring, Stainless Steel Handle, Brass Seat/Stem Washer/FKM O-Ring Softgoods, -20 to 400 deg F, 3-1/8 in H Dimensions

• FKM O-ring provides soft seat performance
• Precision machined hard, positive stop
• Pull ring for manual testing
• ASME/NB certified - stamped UV + NB

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/KINGSTON_115_2_025_Specification_Sheet.pdf