(888) 979-5190 Toll-Free
Beko Technologies AC 190 HP 350 IDI_176588

BEKO AC 190 HP 350 High Pressure Heatless Desiccant Dryer

Beko Technologies DRYPOINT® XC AC 190 HP 350 High Pressure Heatless Desiccant Air Dryer, 1/2 in Inlet Connection

Beko Technologies DRYPOINT® XC AC 190 HP 350 High Pressure Heatless Desiccant Air Dryer, 1/2 in Inlet Connection AC 190 HP 350

Regenerative desiccant dryers are frequently found in industrial applications around the world. These dryers use a desiccant material, which adsorbs the water vapor in the air stream. Heatless desiccant dryers utilize a small amount of dried air to regenerate the desiccant in one tower while the other tower dries the compressed air. DRYPOINT® XC Series heatless desiccant dryers provide very low dew points, are designed around reducing energy and process waste and provide a very user friendly interface.
Beko Technologies DRYPOINT® XC High Pressure Heatless Desiccant Air Dryer, 1/2 in Inlet Connection, 40 to 130 deg F Inlet Air Temperature, Air Flow Rate: 85 scfm, 350 bar Air Pressure,-40 deg F Dew Point Temperature, 5 to 50 deg C Maximum Temperature, Stainless Steel Housing, 53 in Overall Height, 31 in Overall Width, 18 in Overall Depth

Air Flow Rate      :      85 scfm
Air Pressure      :      350 bar
Dew Point Temperature      :      -40 deg F
Housing Material      :      Stainless Steel
Inlet Air Temperature      :      40 to 130 deg F
Inlet Connection Size      :      1/2 in
Maximum Temperature      :      5 to 50 deg C
Overall Depth      :      18 in
Overall Height      :      53 in
Overall Width      :      31 in
  • High quality components are used in construction and combined with high level engineering
  • Reduces traditional height by up to 30%
  • Each dryer includes a feature rich controller with energy saving modes
  • Open frame design where all features are front-mounted, simplifies maintenance and reduces costs
  • The DRYPOINT® AC HP is equipped with a number of individual valve units
  • Their separate fixtures ensure that there is no extra load on the pipes and also protect the dryer against vibration
  • This enhances the operational safety of the dryer and reduces maintenance and spare parts costs
  • Pressurized components are made in stainless steel as standard
  • Highly efficient adsorbents guarantee that the pressure dew point is kept below the required level
  • Two separate pressure reducers for control and regeneration air respectively ensure reliable operation at all times
  • The low pressure section is protected by a safety valve
  • The control and regeneration air is drawn off behind the after filter, ensuring extra reliability and accurate control
  • Thanks to the compact design, the dryer fits into virtually any plant
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/Beko_Technologies_ACC_4_Catalog.pdf
  • linkVideo Link https://youtu.be/HlkqkL4qaxg?t=3