CALL NOW: 866.650.1937

Recently added item(s) ×

You have no items in your shopping cart.

  • Home
  • Fox Model FT2 Inline Flowmeter 2" 316 SS Body 24 VDC

Fox Model FT2 Inline Flowmeter 2" 316 SS Body 24 VDC

Fox Model FT2 Inline Flowmeter 2" 316 SS Body 24 VDC Fox Model FT2 Inline Flowmeter 2" 316 SS Body 24 VDC

Fox Model FT2 Inline Flowmeter 2" 316 SS Body 24 VDC

$3,641.00
Part #: 1234051
$3,641.00
Availability : Contact Us
Model FT2-20P-SS-ST-E1-DD-B0-G1



YOU MAY ALSO NEED

Description

Details

Fox Model FT2 Inline 2" Flowmeter

FT2-20P-SS-ST-E1-DD-B0-G1

Parent Model No: FT2 - Inline Mass Flowmeter & temperature transmitter
Feature 1 Probe/Body: 20P - 2 inch 316ss flow body with male npt ends (schedule 40)
Feature 2 Sensor Material: SS - 316 stainless steel sensor and flowbody
Feature 3 Sensor Type: ST - Standard Sensor -40 to 250F (-40 to 121C)
Feature 4 Enclosure: E1 - Local NEMA 4X enclosure, 24 VDC powered
Feature 5 Display & Config. Panel: DD - No Display & Configuration Panel
Feature 6 Bus Options: B0 -  No communication bus
Feature 7 Calibration: G1 - Air, N2: MF less than 1200 SCFM (2040 NM3H)

Need Additional Options?
Download Fox Flowmeter Component Sheet

 

Fox FT2 Gas Mass Flowmeter & Temperature Transmitter

  • Measures gas flow rate in SCFM, NM3/hr, Lbs/hr, Kg/hr, & many more
  • Wide measurement range; 100 to 1 turndown typical
  • Measures process gas temperature
  • 4 to 20 mA for flow rate & temperature; pulse output for flow/total
  • RS232 for connecting a Palm Handheld or computer; RS422/RS485-Modbus, Profibus-DP, DeviceNet or Ethernet Welded, 316 SS sensor construction; Hastelloy C276 optional
  • Microprocessor based, field programmable electronics
  • On-board 2 line x 16 character, backlit display with configuration panel to view/set readings and parameters
  • Palm Handheld Terminal available to view/set readings and parameters
  • NIST traceable calibration
  • Low-end sensitivity for leak detection
  • Negligible pressure drop
  • No moving parts design
  • FM (U.S.) & FMc (CANADIAN) approved for Class I, II, III, Division 2, Groups A, B, C, D, E, F, G T4A hazardous locations. NEMA 4X and CE approved.

Need Additional Information?
Download Fox Flowmeter Technical Guide

Specifications

Download Fox Flowmeter Technical Guide

Performance Specs

Flow Accuracy:
± 1% of reading ± 0.2 % of full scale*
* Point velocity for insertion flowmeters. Fox recommends a minimum of 15 diameters of straight pipe upstream of the flowmeter and 10 diameters downstream for insertion flowmeters. Fox recommends a minimum of 8 diameters of straight pipe upstream of the flowmeter and 4 diameters downstream for inline flowmeters.

Flow Repeatability:
± 0.2% of full scale

Flow Response Time:
0.9 seconds (one time constant)

Temperature Accuracy:
± 1.8° F (± 1.0° C) over -40 to 250° F (-40 to 121° C); ± 3.6° F (± 2.0° C) over 250 to 650° F (121 to 343° C). Minimum velocity 60 SFPM.a

 

 

Operating Specs

Units of Measurement:
SCFM, SCFH, NM3/hr, NM3/min, Kg/hr, Kg/min, Kg/sec, Lbs/d, Lbs/hr, Lbs/min, Lbs/sec, NLPH, NLPM, SLPM, SMPS, NMPS, SFPM, MMSCFD

Full Scale Flow Ranges for In-Line Flowmeters:

Size SCFM NM3/hr
0.25" 0-16 0-27
0.5" 0-48 0-82
.75" 0-120 0-204
1" 0-192 0-326
1.25" 0-332 0-564
1.5" 0-450 0-760
2" 0-750 0-1280
2.5" 0-1090 0-1855
3" 0-1600 0-2720
4" 0-2880 0-4893
6" 0-6400 0-10870

Gas Pressure (maximum):
In-Line (1/4" through 6"):
NPT 500 psig (34.5 barg)
150# flange 230 psig (16 barg)
Check with factory for higher pressure options

Inline Flowmeter:
Note: Pressure ratings stated for temperature of 100°F (38°C).

Temperature:
Std sensor: -40 to 250°F (-40 to 121°C)
HS Sensor: 32 to 400°F (0 to 204°C)
HT Sensor: 32 to 650°F (0 to 343°C)
Enclosure: -40 to 158°F (-40 to 70°C) without display, 32 to 140°F, (0 to 60°C) with display

Input Power:
24 VDC, ± 10%, 0.75 amp standard;
85 to 250VAC 50/60Hz, 20 watts optional

Output:
Two isolated 4 to 20 mA outputs (1 for flow & 1 for temperature); isolated pulse output 0 to 100Hz, 10 volts p/p for flow (the pulse output can be used as an isolated solid state output for alarms)
RS232 for connecting a Palm Handheld or computer; RS422/ RS485-Modbus, Profibus-DP, DeviceNet or Ethernet

 

 

Physical Specs

Sensor material:
316 stainless steel standard; Hastelloy C276 optional
Enclosure: FM (U.S.) & FMc (CANADIAN) approved for Class I, II, III, Division 2, Groups A, B, C, D, E, F, G, T4A hazardous locations. NEMA 4X and CE approved.
Options: Remote NEMA 4X electronics enclosure with explosion-proof sensor j-box.

Cabling:
Remote enclosure: 5-conductor, 18 AWG, twisted, shielded, 100 feet maximum
Packing gland assembly: 125 psig (8.6 barg ) max. (See Figure 6)
High pressure (crank) retractor: NPT 600 psig (41.4 barg), ANSI 150 flange & ANSI 300 flange, no valve supplied. (See Figure 7)

 

 

Dimensional

Inline Flowmeter Dimensions - See Diagrams 3 & 5
Pipe Size L H HH
0.25" 5.80 (14.7) 12.5 (31.8) 9.9 (25.1)
0.5" 12.0 (30.5) 12.5 (31.8) 9.9 (25.1)
.75" 12.0 (30.5) 12.5 (31.8) 9.9 (25.1)
1" 15.0 (38.1) 12.5 (31.8) 9.9 (25.1)
1.25" 12.0 (30.5) 12.5 (31.8) 9.9 (25.1)
1.5" 12.0 (30.5) 12.5 (31.8) 9.9 (25.1)
2" 12.0 (30.5) 12.5 (31.8) 10.0 (25.1)
2.5" 18.0 (45.7) 12.6 (32.0) 10.0 (25.4)
3" 18.0 (45.7) 12.6 (32.0) 10.0 (25.4)
4" 18.0 (45.7) 12.6 (33.3) 10.0 (26.7)
6" 24.0 (61.0) 14.2 (36.1) 11.6 (29.5)

Note: Dimensions in parenthesis are centimeters. For certified drawings,
consult factory.

Download Fox Flowmeter Technical Guide

 

Diagrams

Download Fox Flowmeter Technical Guide

 

Fox Inline Flowmeter Diagrams

Download Fox Flowmeter Technical Guide