Kingston 115CR-2-025 Stainless Steel Safety Valve

KINGSTON 115CR-2-025 Safety Relief Valve, Vent to Atmosphere, 1/4 in Nominal, NPT Connection, 22 cfm, -20 to 400 deg F

KINGSTON 115CR-2-025 Safety Relief Valve, Vent to Atmosphere, 1/4 in Nominal, NPT Connection, 22 cfm, -20 to 400 deg F 115CR-2-025

KINGSTON model 115CR ASME code soft seat safety valves are constructed of stainless steel with a FKM seal and positive stop for a bubble tight seal. This valve is equipped with a pull ring for manual testing. Internal construction and performance are the same as model 114 differing only by the pull ring. The KINGSTON model 115CR ASME code soft seat safety valve, like every KINGSTON safety valve, is set and tested at factory for quality and dependability. Registered in all Canadian provinces and territories. Set pressure range 25 to 300 psi (5 psi increments only). Maximum temperature -20 to 400 deg F.
KINGSTON Safety Relief Valve, Model: 115CR, Vent to Atmosphere Style, 1/4 in Nominal, NPT Connection, 25 psi Pressure Rating, 22 cfm Flow Rate, Air, Gas, Steam Media, Pull Ring Actuator, 0.219 sq-in Orifice, Stainless Steel Body, Soft Seat, Stainless Steel Stem, Vinyl Seal, Trim Material: Stainless Steel Spring, Stainless Steel Handle, FKM O-Ring/Stainless Steel Seat/Stem Washer Softgoods, -20 to 400 deg F, 3-1/8 in H Dimensions

Actuator Type      :      Pull Ring
Body Material      :      Stainless Steel
Connection Type      :      NPT
Dimensions      :      3-1/8 in H
Flow Rate      :      22 cfm
Handle Material      :      Stainless Steel
Media      :      Air, Gas, Steam
Model      :      115CR
Nominal Size      :      1/4 in
Orifice Size      :      0.219 sq-in
Pressure Rating      :      25 psi
Seal Material      :      Vinyl
Seat Type      :      Soft
Softgoods Material      :      FKM O-Ring/Stainless Steel Seat/Stem Washer
Stem Material      :      Stainless Steel
Style      :      Vent to Atmosphere
Temperature Rating      :      -20 to 400 deg F
Trim Material      :      Stainless Steel Spring
  • FKM O-ring provides soft seat performance
  • Precision machined hard, positive stop
  • Pull ring for manual testing
  • ASME/NB certified - stamped UV + NB
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/KINGSTON_115CR_2_025_Specification_Sheet.pdf