Kingston 115CR-2-090 Stainless Steel Safety Valve

KINGSTON model 115CR ASME code soft seat safety valves are constructed of stainless steel with a FKM seal and positive stop for a bubble tight seal. This valve is equipped with a pull ring for manual testing. Internal construction and performance are the same as model 114 differing only by the pull ring. The KINGSTON model 115CR ASME code soft seat safety valve, like every KINGSTON safety valve, is set and tested at factory for quality and dependability. Registered in all Canadian provinces and territories. Set pressure range 25 to 300 psi (5 psi increments only). Maximum temperature -20 to 400 deg F.
KINGSTON Safety Relief Valve, Model: 115CR, Vent to Atmosphere Style, 1/4 in Nominal, NPT Connection, 90 psi Pressure Rating, 59 cfm Flow Rate, Air, Gas, Steam Media, Pull Ring Actuator, 0.219 sq-in Orifice, Stainless Steel Body, Soft Seat, Stainless Steel Stem, Vinyl Seal, Trim Material: Stainless Steel Spring, Stainless Steel Handle, FKM O-Ring/Stainless Steel Seat/Stem Washer Softgoods, -20 to 400 deg F, 3-1/8 in H Dimensions

• FKM O-ring provides soft seat performance
• Precision machined hard, positive stop
• Pull ring for manual testing
• ASME/NB certified - stamped UV + NB

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/KINGSTON_115CR_2_025_Specification_Sheet.pdf